Krömer mid-rise scissor lift "Zurich"

Special features of "Zurich"

• 1A processing quality with CE certificate for UVV 
• Production according to ISO 9001
• Double line system for symmetrical distribution of the system pressure
• little space requirement and absolute door freedom
• Pulverbeschichtete Lackierung mit kratzunempfindlicheren Oberflächen-Behandlung
• Powder coated paintwork with scratch-resistant surface treatment
• lowering safety device
• Low-wear bearing of the scissor joints
• Mechanical synchronization control
• Lockable ramps, resilient up to 2 tons per ramp (4x drive-on ramps)
• two powerful, hard-chromed hydraulic cylinders
• Foot protection
• electronic stroke limitation by limit switches
• Supply of spare parts secured for a long time
• Multiple safety devices with hose rupture protection, overload valve, mechanical safety latches

The X46 scissor lift specifically covers the needs of tire and body work. But it is also a perfect workplace in the workshop for service work and work in the vehicle interior. With a manageable investment, an additional universal workstation can be set up quickly - without foundation work.

Thanks to its flat construction, the mobile scissor lift "Zurich" enables space-saving storage. With the optional mobile chassis (mobile kit), you can easily move your lift in the garage and turn it 360° on the spot. No compressed air and therefore no compressor is required to control the safety catches, because with the X46 "Landshut PLUS" the locking is done automatically.

With the powerful electric motor in the hydraulic oil, low-noise operation is possible. Easy on the ears and nerves during daily use. Another highlight of the control panel is the standard built-in industrial control. The electrics of the Krömer control panel now consist of only 3 main components; Microcomputer control, circuit board and motor contactor.

These standardized assemblies (Conrad Electronics modular principle) can be easily replaced even years later thanks to the new plug-and-play modular design, without time-consuming troubleshooting. For the user, this is an enormous gain in terms of operating safety.

For the first usage of the scissor lift "Zurich", 15 liters of HLP46 hydraulic oil is required (Read the manual).

Unfortunately, this model is not designed for SUVs and other vehicles with a wheelbase of more than 3000 mm, such as T4- T6, Vito, Viano, V-Class, pickups or larger. For the customers owning vehicles with a wheelbase exceeding 3000mm, we sugesst the mid-rise scissor lift "Brighton" (Pay attention to the operating instructions and the center of gravity).**

* additional hand pump is required in order to remove the safety catch from the lift 

 ** The dimensions of the scissor lift can be found in the technical drawing.

Tip!

For trouble-free operation of the scissor lift and to avoid vehicle damage, there must be a room height of at least 3.20 m or 3.50 m for mid-rise scissor lifts (depending on the vehicle and lifting height of the lift). Please refer to the technical drawing for the dimensions of the lifting platform.