4 Post Lift 3.6t "Ottawa" Double Parking Lift

Special features of "Ottawa"

• 1A processing quality, with CE certificate for UVV acceptance

• Production according to ISO 9001

• Signal tone and CE-Stop when lowering to prevent crushing in the foot area (foot trapping protection)

• Safety locking system with pneumatically unlockable mechanical safety latch to prevent the lift from being lowered unintentionally

• Audible alarm and emergency stop button

• Exceptionally low drive-over height (125 mm)

• Secured ground clearance is 1730 mm

• Rope breakage protection and slack rope
  foot protection

• Powder-coated finish, with a scratch-resistant surface

• Overload protection by means of overload valve

• Convenient control box (protection class IP54 and 24 V control voltage)

• Hydraulic cylinders under the runway for powerful lifting

• Hydraulic overload valve

• Including removable oil pans

--- IMPORTANT NOTICE ---  When unloading, the customer must have a forklift available

Especially in the commercial professional sector, there are special requirements for car lifts. With the FP 24 "Ottawa" 4-post lift, Krömer provides you with the perfect companion for hydraulic lifting. Because with an unbelievable load capacity of 3,600 kg and a dead weight of 780 kg, the lift can lift large and small cars .

With a maximum lifting height of 1.90m and the resilient drive-on ramps, the FP24 4-post lift is simply a must for almost all maintenance work on Krömer tires.

Optionally available are 4 plastic drip pans and a metal oil pan. Krömer ensures that nothing goes wrong in the future. 

With this model, our "Krömer Easy Angles" can also be ordered as an option for €69. With the help of these practical offset plates, the hydraulic motor and control panel can be rotated at a 90° angle around the main column. It is thus possible for you to accommodate several stages in less space or to mount the columns close to the wall.

We also offer an optional axle-free jack for the FP42 post lift for €599. Changing a wheel should therefore not be a problem on the 4-post lift.

No more scratches on the paintwork and poor processing: Your new 4-post lift from Krömer has a powder-coated paint finish. In addition, the ramps on the platform are painted in RAL 7016.

Of course, this model also comes to you with the comprehensive Krömer guarantee, because the 4-post car lift "Bensheim" - FP24 has been tested and approved in accordance with the Machinery Directive in accordance with Appendix IV with a type examination and was therefore manufactured in accordance with ISO and CE regulations. This is how you succeed in the UVV acceptance with distinction. If something should stop working, we always have the right spare part ready for you. 

We have Allianz product liability insurance and business liability insurance on our products!

For the first start-up you need hydraulic oil of the DIN type HLP 46 (12 liters required). Before operation, the operator's manual, the concrete foundation plan and the operation and maintenance manual must be worked through. Electrical work must be carried out by appropriately authorized specialist personnel.

* additional hand pump is required to release the lift from the safety catch