Reflector for photoelectric sensor on double scissor lifts XX446
In stock
- Delivery time:
- Shipping cost:
- For double scissor lifts: XX63, XX64, XX65
- Reflector for optical sensor
Description
Reflector for photoelectric sensor on Kroemer double scissor lifts – XX446
The XX446 reflector is a suitable spare part for the optical sensor or photoelectric sensor used on various Kroemer double scissor lifts. It is suitable for models XX63, XX64 and XX65 and serves as the reflective surface for the opposite optical sensor.
The reflector ensures that the emitted light signal is reliably reflected back to the sensor. This allows the photoelectric sensor to perform its intended function within the lift’s safety system. A damaged, dirty or missing reflector can affect sensor detection and should be replaced if necessary.
Installation is straightforward: the XX446 reflector can be bonded directly to the designated position on the lift. Alternatively, it can also be secured with screws. The required mounting holes are not pre-drilled and must be drilled by the user if this mounting method is chosen.
Suitable for
- Kroemer double scissor lifts XX63, XX64, XX65
Installation note
The reflector can be bonded or screwed into place. If screw mounting is used, the required holes must be drilled by the user.
Scope of delivery
- 1 reflector for photoelectric sensor XX446
Technical Data
Technical Data
| SKU | XX446 |
|---|---|
| EAN-Code | 0703441938450 |
| Delivery Time | 5–10 business days |
| Shipping costs | 8 |
| Suitable for express delivery | No |
| Length | 150 mm |
| Width | 50 mm |
| Height | 7.5 mm |
| Weight | 35 g |
Delivery Scope
Delivery Scope
1 reflector for photoelectric sensor XX446