FP575 equalising cable 5,543 mm for Kroemer FP46

Medium equalising cable for Kroemer FP46 4-post lift – FP575

The FP575 equalising cable is a suitable replacement part for the Kroemer FP46 4-post lift. It supports the even operation of the lift and contributes to reliable guidance of the runways during raising and lowering.

A 4-post lift is fitted with a total of four equalising cables of different lengths. These are classified as short, medium, long and extra-long equalising cables. This product is the medium-length equalising cable for the Kroemer FP46.

The steel cable has a length of 5,543 mm and a diameter of 12.5 mm. It is supplied as a single equalising cable.

Equalising cables are continuously exposed to mechanical stress during operation. Damage, corrosion, broken individual wires or other signs of wear may affect the reliable operation of the lift. Timely replacement of the affected cable enables professional repair of the cable guidance system.

The other equalising cables for the FP46 in short, long and extra-long versions can be found below the product description in the Accessories section. The appropriate cable lengths are linked there as separate replacement parts.

Product features

• Medium equalising cable for the Kroemer FP46 4-post lift
• One of four equalising cables of different lengths
• Version: medium length (5,543 mm)
• Supports the even operation of the lift
• Durable design for regular workshop use
• For professional repair of the cable guidance system

Technical data

• Item number: FP575
• Compatible model: Kroemer FP46
• Version: medium equalising cable
• Length: 5,543 mm
• Cable diameter: 12.5 mm
• Required quantity of this cable length per lift: 1 piece
• EAN: 0703441936364

Scope of delivery

• 1 FP575 equalising cable, medium-length version
• Length: 5,543 mm

Important application note

Before ordering, carefully check the lift model, item number and length of the existing equalising cable. As a 4-post lift uses four cables of different lengths, the individual versions must not be confused with one another.

A serial number or marking is located at both ends of the equalising cable. This provides information about the version and generally also includes the cable length, often at the end of the marking. Compare this information with the existing cable to select the correct replacement part.

The short, long and extra-long equalising cables can be found below this description in the Accessories section. Replacement, tensioning and subsequent adjustment of the equalising cables must only be carried out by qualified personnel when the lift is fully lowered, switched off and secured against unintentional activation.