Hydraulic Mobile Scissor Lift – Kroemer X11

Specialities of the Scissor lift "London" X11

• is compact ( less space is needed )
• No need in moving connecting rod ( bar )
• Air compressor is not required
• full automatic Lifting and lowering per button click.
• adjustable access ramp
• Low noise function due to the limit switch und cushioning
• Top processing quality with CE marking for APR acceptance
• Production according to ISO 9001
• Double line system for symmetrical distribution of the pressure
• The lifting height is 1000 mm
• The minimum requirement of the ground composition only 15 mm
• Automatic unlocking of the security system
• Automatically engaging safety latches
• Powder layered paint with scratch insensitive surface treatment
• Powerfull electrical engine in hydraulic oil with IP 54 control unit
• Lowering protection device
• Low-wear of the scissor joints
• Mechanical synchronisation control
• lockable ramps, resilient  till 1.6 tons for each ramp (4x ramps)
• two powerful, chrome-plated hydraulic cylinders
• Foot trap protection
• electronic lifting limitation by limit switch
• absolute space freedom because there are no annoying pillars
• Spare parts supply secured for a long time
• Multiple safety devices through hose rupture protection, overload valve, mechanical safety latches

The Krömer's scissor lift X10 does not need a compressor! Perfect beginners lift for car enthusiasts . Allowing you to change the oil or/and tires by yourself without any extra effort! The maximum lifting capacity is 3 tons!

This type of scissor lift is already used in thousand different garages not only by car enthusiasts but also in professional car workshops . Almost all vehicles up to 3t can be easily lifted on the sills due to the longitudinally adjustable mounting platforms. In addition to the lift, you will be provided with the control panel

Due to its flat construction, the mid-rise scissor lift "London" enables space-saving storage. With the optional mobile chassis (mobile kit), the lift can be easily moved around the garage as well as turned 360° around the spot.

The practical deflection aid  of our scissor lift allows to lift the vehicles up to 3t from the position zero. In addition, this also functions as cushioning for the platforms. No more loud cracking during the lowering of the lift!

Due to its particularly stable 8 mm thick drive-on platform, almost any vehicle can be handled by this lift. The scissors have a massive connected, non-rotating connecting rod. For the installation on the floor it can be also removed.

Two limit switches are also installed: the upper switch acts as overpressure protection and prevents damage to the construction, the lower limit switch activates the warning siren (CE stop) for the last three seconds of lowering time and ensures a low-noise working atmosphere. Another special feature is the astonishingly low drive-over height of 105 mm.

The closed limit switch , which prevents damage to the electrical system and the hydraulic motor, sums the Krömer-Package up. 

We as Krömer-team are controlling that our chrome-plated hydraulic cylinders have top notch quality , which is reflected in the lower susceptibility to errors and the reduced maintenance intensity. If any kind of errors occur in your lift, we always have the right spare part ready for you. The spare part can be easily found here.

The Krömer "London" X10 scissor lift has been tested and approved in accordance with the Machinery Directive in accordance with Appendix IV with a type examination and is therefore equipped with a CE certification from one of the leading testing offices that deals exclusively with lifts.

In addition to the usual CE regulations, both the platform and the control panel were tested separately for function before going to the global market. With this model, we have already simulated 15,000 lifting cycles at the factory in order to guarantee you maximum safety. In addition, our scissor lift has been FULLY checked electronically and technically and complies with the latest legal requirements as well as the current guidelines!

This is real Krömer quality!

 ***Attention!: Please note here that the wheelbase of the vehicle must not be longer than three meters. The "Fulda" cannot lift a 3.0t passenger bus, which is ten meters long. In addition, the mobile lifting table is not suitable for use on paving stones! In the "Fulda", like most of its competitors, the safety catches are built into the ground. If you have SUVs or most of your clients have SUVs, we recommend the "Berlin", "Jena Plus" or "Potsdam Plus" models, as the magnets are three times bigger and therefore more secure.

Please take into consideration before buying the product: Please consider the maximum lifting height (+300 mm) before the purchase.The height of the vehicle should be taken into consideration as well because Krömer's Handelsgesellschaft mbH takes no responsibility in any kind of damage to the vehicle's roof caused by operating errors and technical defects on the scissor lift.