Mobile Scissor Lift with access ramps - Kroemer X47

The X47 scissor lift is specially designed to meet the demands of tyre and bodywork repairs. However, it also serves as the ideal workstation for servicing and interior work in the workshop. With a manageable investment, you can quickly set up an additional universal workstation – without the need for any foundation work.

The flat design of the lift allows for space-saving storage. With the mobile chassis (mobile kit), you can easily move the lift around the garage and rotate it 360° on the spot. No compressed air – and therefore no compressor – is required to operate the safety locks, as the X47 features automatic locking. The integrated auxiliary arm (deflection aid) efficiently transfers the lifting force, allowing the lift to reach its full load capacity even from the lowest position.

The powerful electric motor in hydraulic oil ensures quiet operation – gentle on the ears and nerves during everyday use. Another highlight of the control panel is the industrial control system, which comes as standard. The electrical system of the Kroemer control panel consists of only three main components: microcomputer control, circuit board, and motor contactor.

Only the 400-volt version is suitable for lifting vans (depending on the wheelbase) or similar vehicles.  
Please note: It is essential to check the wheelbase of the vehicle before purchasing. The manufacturer cannot be held liable.

For initial commissioning, you will require 5 litres of HLP46 hydraulic oil (please refer to the operating instructions).

 ** Please refer to the technical drawing for the dimensions of the lift.

Note: To ensure trouble-free operation of the scissor lift and to avoid damage to the vehicle, the room height must be at least 3.20 m or 3.50 m for mid-rise scissor lifts (depending on the vehicle and lifting height of the lift). Please refer to the technical drawing for the dimensions of the lift.