Mid-Rise mobile scissor lift "Glasgow"

Special features of the scissor lift "Glasgow"

• 1A processing quality with CE certificate for UVV 

• Production according to ISO 9001

• 92 cm lifting height

• Grease nipples on almost all joints

• Low requirements on the installation area: 

• Floor requirement only 150 mm concrete grade
  at least C20/25 DIN1045:2001-D7 (armoured)

• Safety locking system by pneumatically unlockable
  mechanical safety catch to prevent accidental lift lowerage

• Acoustic signal at the last third of the lowering process,
  Signal tone and CE stop when lowering to prevent crushing
  in the foot area (foot trap protection)

• Dead Man's switch (24V-low voltage)

• Automatic unlocking of the security system

• Automatically locking safety latches

• Exceptionally low drive-over height (105 mm)

• High quality and solid construction

• four powerful, high-quality and hard-chromed Krömer hydraulic cylinders

• Powder coated paintwork with
  scratch-resistant surface treatment

• Powerful aluminum electric motor
  with IP 54 control unit
  + Aluminum hydraulic motor

• Emergency lowering system in case of power failure

• anti-drop device

• Low-wear bearing of the scissor joints

• Mechanical synchronization control

• Lockable drive-on ramps, resilient
  up to 1.6 tons per ramp (4x ramps)

--- Important Information --- Compressor is not part of the delivery 

The "Glasgow" mid-rise scissor lift has a load capacity of 3.5t and a total weight of 710 kg. Due to the solid and high-quality construction, the lifting platform is particularly suitable for heavy transporters or SUVs. No compressor is necessary for the scissor lift. It is actuated by pressing a button for the electromagnetic unlocking.

A quiet operation is due to the engine! Since the newly designed engine is completely immersed in oil, it is extremely quiet! Gentle on the ears in daily use.

The astonishingly low drive-over height of incredible 105 mm and a maximum lifting height of up to 92 cm is particularly amazing. This makes the mobile scissor lift Krömer X48 particularly suitable for low ceilings.

Due to the flat construction of the scissors from Krömer, the "Glasgow" enables space-saving storage. The "Glasgow" also comes with the mobile chassis (mobile kit) at no extra charge, with which you can easily move your lift in the garage and/or turn it 360° on the spot.

A safety system is provided with the pneumatically unlockable safety catches, which means that the scissor lift can be raised and lowered successfully.

The "Glasgow" - X48 scissor lift has been tested and approved according to the Machinery Directive in accordance with Annex IV with a type examination and is therefore equipped with a CE certification from one of the leading testing offices, which deals exclusively with lifting platforms.